How to Fix a Slow Draining Sink

You’ve noticed the drain in your sink is a little slow lately, what do you do?

You could ignore it, but the problem will build until the sink takes 20 minutes or more to drain. Or it’ll sit stagnant all day.

A slow draining sink is usually a quick fix you can do yourself. See the methods below.

Snake the Drain

Drain snakes are awesome to keep around the house. You can get them at home improvement stores or even from the home section of a Dollar Tree.

These long plastic sticks have hooks on both sides and are quite sharp. You stick the long, hooked part down the drain and push it up and down as the pipe allows.

Then wiggle it as you pull up. We suggest wearing gloves and a face mask if you’re sensitive. Wet and mangy hair plus sink gunk doesn’t smell good when it comes out!

Over a trash can, take a paper towel and wipe the gunk off in the opposite direction than the spikes. Just like you would clean a cheese grater.

You can repeat a few times if you feel like there’s more down there. Even the cheap drain snakes are reusable until you feel like the hooks aren’t as sharp or intense.

Make sure you wipe them down with a bleach wipe or disinfectant before storing.

The Drain Plug

You know the thing that makes your drain plug go up and down? Unscrew the drain cover and you’ll see a four-pronged white plastic piece.

Sometimes you’ll see things stuck in the white piece and be able to pull it out with tweezers or your fingers.

Other times you need to take the whole unit out to clean it. Turn off your water (for good measure) and go under your sink. You should see a metal stick with holes connected to a rod coming out of the top of your P trap.

Using your fingers, unscrew the rod from the big pipe unit. The pressure on the metal stick will lessen and you’ll be able to push the rod out of its metal-stick hole.

This is the tension rod that controls your drain-plug handle. With it gone you can go back up over the sink and pull out the white plastic piece.

Most likely you’ll see some nasty stuff come off the bottom of that plastic piece. Treat it like you would treat a drain snake and clean it off.

It’s not uncommon for there to be gunk or slime in between the folds, so soak the pieces in a bleach/soap solution.

You can do this and then snake your drain for less difficulty as well.

Then, put the white plastic part back in and push it until it’s in the starting position. Add the rod back to the main pipe unit and screw it in.

Carefully re-attach the metal stick tension rod and screw the drain cover back on. Voila!

Slow Draining Sink Fixed

One of these methods or a combination of both above will unclog a common slow draining sink. If they don’t work, your problem may be more complicated.

You can try cleaning your gunk trap yourself, but that’s an even grosser process. Leave that to the professionals.

They’re on call and waiting for you!

Things You Need To Know About Repiping

The concept of repiping is still a mystery to most people. There are a number of things they assume wrongly about what it means to require a repiping. For example, there is a popular misconception that houses built or renovated around 1800’s and 1900’s are the only primary candidates of repipe. However, the truth is any house regardless of its age might require a repipe if it is necessary. Because in addition to the age of the house, the quality of the plumbing and the history of maintenance also play a key role in necessitating repipe at Riverside

A repipe doesn’t necessarily mean replacing all the old pipes in the home with new ones. At times, only a particular section of the plumbing system requires repiping while the others work perfectly fine. So the particulars of a repiping job depend on the requirements of each home.

Seemingly, the plumbing system of a home may appear healthy. Hence, you cannot know whether your house needs repiping until you have undertaken a little examination. Any pipe which is broken and corroded or looks damaged beyond repair requires repiping. If most of your plumbing system appears to be in the same condition, then it is best to hire a plumbing company for a complete repipe in Orange Country. A repiping project is too complex and time consuming to be done on your own.

Though there are lots of signs and symptoms that indicate the requirements of a repipe in Los Angeles, you usually need a professional to get a proper assessment.

When does Repiping become necessary?

Pipes are strong and sturdy. But this doesn’t mean that they will last forever. Your plumbing system is something which is put to use on a daily basis and it would require replacement eventually. Experts in repipe Orange County claim that while repairs can fix your issues at the moment, repiping is a more permanent solution and could help you avoid any further problems with your home-plumbing for a very long time.

Here are some things that indicate the need for repiping:

  • If you happen to hear dripping sounds near your walls or ceilings, it could be due to any leak in the plumbing. You don’t necessarily hear water leaks all the time, so keep a look out for other symptoms of water damage.
  • Rusting is one of the major challenges faced by the pipes. Low quality pipes would definitely rust at some point. If there is any change in the taste, color or odor of the water, it might indicate that the pipes are rusty.
  • If your water bill rises up unreasonably, it is a big warning sign that there is something wrong with your pipes.
  • If your house consists of galvanized steel plumbing, the pipes would be more vulnerable to corrosion, which would result in water leaks and breaks.
  • Are you facing regular pipe repair problems? It is more likely that the material of the pipes is not adequate for the job. In addition to leakage issues, clogging and high water pressure also signifies that the questionable quality of the pipe.

There are many professionals who offer dedicated slab leak detection Los Angeles & Bellflower CA. Contact a credible service provider today to know more about your options.